TorqueSim, RealSimGear, and X-Aviation are excited to announce the release of the following updates for our products, following further tweaks to enhance the aircraft for X-Plane 12.
Take Command! SR22 G1000 Series 2.1.0
Take Command! SR20 G1000 2.1.0
To Update: Download your installer(s) here and re-install!
Don’t have the aircraft already? You can check out the products here:
Looking for an FAA-approved AATD or BATD? Check out the RealSimGear SRx AATD or RealSimGear Cirrus BATD for a solution featuring the TorqueSim SR2X Pro. Now available with G3 SR20/22/22TN and G6 SR20/22/22T models. Any questions? Feel free to contact us here. We also have hardware sims for the SR20, SR22, and SR22T G7 coming soon! Reach out for more info.
As always, thank you for supporting TorqueSim, RealSimGear, and X-Aviation! Enjoy these latest updates, and stay tuned for further improvements in the future.
SR20 G1000 and SR22 G1000 Release Notes
Important Note: Version 2.1.0 migrates to the new X1000 introduced in X-Plane version 12.1. This update is not compatible with any versions of X-Plane prior to 12.1.0.
Integrates improved state tracking to bring in the features of the X-Plane 12.1 X1000
Improve autopilot and yoke behaviors to improve aircraft handling
Improve support for the latest RealSimGear hardware
Improved FMOD sound pack
Improved Yaw Damper behaviors
Latest RealSimGear command mappings
Migrate GPS arm logic to X-Plane default
Spark plug status now tied to wear settings
[SR22TN] Improved aircraft drag tuning in certain low-speed regimes
[SR22TN] Properly compensate for ISA deviation in percent power
TorqueSim, RealSimGear, and X-Aviation are excited to announce the release of the following updates for our products, following further tweaks to enhance the aircraft for X-Plane 12.
Take Command! SR22 G1000 Series 2.0.2
Take Command! SR20 G1000 2.0.2
To Update: Download your installer(s) here and re-install!
Don’t have the aircraft already? You can check out the products here:
Looking for an FAA-approved AATD or BATD? Check out the newly-approved RealSimGear SRx AATD or RealSimGear Cirrus BATD for a solution featuring the TorqueSim SR2X Pro. Now available with G3 SR20/22/22TN and G6 SR20/22/22T models. Any questions? Feel free to contact us here.
As always, thank you for supporting TorqueSim, RealSimGear, and X-Aviation! Enjoy these latest updates, and stay tuned for further improvements in the future.
SR20 G1000 and SR22 G1000 Release Notes
Important Note: In preparation for upcoming feature enhancements to the X1000, including native synthetic vision and additional pages, as discussed on the X-Plane blog here, reworking of our internal G1000 state tracking logic has begun. For both this reason, and additionally to address numerous recurring stability issues, we have removed the custom synthetic vision system from the SR2X line.
Tuned for X-Plane 12.07
Adds the X-Plane Cirrus-style G1000 color scheme
Engine model tuning for improved stability and smoothness
Improve tuning of autopilot constants for improved behavior, especially with the RealSimGear Cirrus Yoke
Improve FMOD sound pack with further refinements and tuning
Address issues with rain effect artifacts
T-1653 Check fuel density settings
T-1928 Year missing from navigation database expiration on boot screen
Fix artifacts on “Grey & Black” livery
Restore marker beacon audio
Update to latest libraries
Add the appropriate v-speeds on the G1000 speed tape
TorqueSim, RealSimGear, and X-Aviation are excited to announce the release of the following updates for our products, following further tweaks to enhance the aircraft for X-Plane 12.
Take Command! SR22 G1000 Series 2.0.1
Take Command! SR20 G1000 2.0.1
Take Command! SR22 Entegra Series 2.0.1
Take Command! SR20 Entegra 2.0.1
To Update: Download your installer(s) here and re-install!
Don’t have the aircraft already? You can check out the products here:
Looking for an FAA Approved BATD? Check out the RealSimGear Cirrus BATD for a solution powered by the TorqueSim SR20/22.
As always, thank you for supporting TorqueSim, RealSimGear, and X-Aviation! Enjoy these latest updates, and stay tuned for further improvements in the future.
SR20 G1000 and SR22 G1000 Release Notes
New Features:
Newly recorded sounds for the FMOD sound pack with new engine sounds and other accessory sounds improved! [SR22: Recorded from a local G3 SR22.]
Further X-Plane 12 tuning and improvements!
REMINDER!: ARM64 support prepped for future. (Note: For ARM64 Mac (M1+ processors) users, ensure you are running Rosetta for now.
Important Note Currently, the Synthetic Vision System (SVS) is known to cause issues on some configurations when Zink is enabled. It is highly recommended to not use Zink with this version, with SVS enabled. Additionally, sporadic crashes during load have been seen on Mac.
SVS is enabled by default, but it can be disabled via a config file without the sim loaded. If you are experiencing crashes with the SR2X aircraft, disable SVS by navigating to X-Plane 12/Aircraft/X-Aviation/SR22 Series/{Aircraft Type}/plugins/sr_systems/settings/. Open the file settings.cfg in a text editor and make the change to the svs line:
To disable SVS: svs = 0 To enable SVS: svs = 1
Bug Fixes and Improvements:
Revamped all wing and gear textures to remove unnecessary ambient occlusion
Fixed gear height and operation
Adjusted chock position
Missing Cirrus logo fixed
T-1879 Disabling aircraft doesn’t reset G1000 engine bar override
Icing improvements
Fixed invalid dataref reference in physics plugin
Livery fixes
Wing open seam closed
Updated libacfutils version to improve rendering of non-svs components with Zink and Mac
Engine loops refined to rid the soundpack of all popping between loops
Prime Pump sound refined to blend more naturally between intro and loop
Engine start sound refined volume curve to allow for a smoother transition to engine sound from ignition
Adjust aircraft lighting
Livery fix for improper normal metal
SR20 Entegra and SR22 Entegra Release Notes
New Features:
Newly recorded sounds for the FMOD sound pack with new engine sounds and other accessory sounds improved! [SR22: Recorded from a local G3 SR22.]
Further X-Plane 12 tuning and improvements!
REMINDER!: ARM64 support prepped for future. (Note: For ARM64 Mac (M1+ processors) users, ensure you are running Rosetta for now.
Bug Fixes & Improvements:
Revamped all wing and gear textures to remove unnecessary ambient occlusion
Fixed gear height and operation
Adjusted chock position
Missing Cirrus logo fixed
STEC LIT bug fixed
Icing improvements
Fixed invalid dataref reference in physics plugin
Livery fixes
Wing open seam closed
Updated libacfutils version to improve rendering with Zink and Mac
Engine loops refined to rid the soundpack of all popping between loops
Prime Pump sound refined to blend more naturally between intro and loop
Engine start sound refined volume curve to allow for a smoother transition to engine sound from ignition
TorqueSim, RealSimGear, and X-Aviation are excited to announce the release of the following updates for our products, following an intense development cycle to fully revamp the aircraft for X-Plane 12:
Take Command! SR22 G1000 Series 2.0.0
Take Command! SR20 G1000 2.0.0
Take Command! SR22 Entegra Series 2.0.0
Take Command! SR20 Entegra 2.0.0
To Update: Download your installer(s) here and re-install!
Don’t have the aircraft already? You can check out the products here:
Looking for an FAA Approved BATD? Check out the RealSimGear Cirrus BATD for a solution powered by the TorqueSim SR20/22.
As always, thank you for supporting TorqueSim, RealSimGear, and X-Aviation! Enjoy these latest updates, and stay tuned for further improvements in the future.
SR20/22 G1000 2.0.0 Release Notes
New Features:
Fully Optimized for X-Plane 12!
Entirely revamped 3D model, animations, and textures; designed and optimized for X-Plane 12 format changes and the new rendering engine.
Updated FMOD sound pack to take advantage of XP12 FMOD features, integrated new sound samples, and more
ARM64 support prepped for the future. (Note: For ARM64 Mac (M1+ processors) users, ensure you are running Rosetta for now.
Important Note Currently, the Synthetic Vision System (SVS) is known to cause issues on some configurations when Zink is enabled. It is highly recommended to not use Zink with this version, with SVS enabled. Additionally, sporadic crashes during load have been seen on Mac.
SVS is enabled by default but can be disabled via a config file without the sim loaded. If you are experiencing crashes with the SR2X aircraft, disable SVS by navigating to X-Plane 12/Aircraft/X-Aviation/SR22 Series/{Aircraft Type}/plugins/sr_systems/settings/. Open the file settings.cfg in a text editor and make the change to the svs line:
To disable SVS: svs = 0 To enable SVS: svs = 1
Bug Fixes and Improvements:
T-1765 Engine page FOD information missing
T-1803 Fix color detection for profile view
T-1828 Charge battery command doesn’t function
T-1766 Add tick system to configs in TSLIB
T-1851 Increase base instrument brightness
T-1792 LPV Approach Capability due to missing SBAS receiver
T-1847 Zink crashes X-Plane during flight loading
T-1721 Get ARM build
T-1778 Flight control effectiveness XP12
T-1755 Excessive left yaw when taxiing
T-1827 GCU Input not working at random times
T-1848 Brake Hold with Max Effort functionality doesn’t work
T-1714 Switch G1000 rendering to G1000 render space
T-1858 Flaps balloon too pronounced on deployment
T-1857 Elevator trim authority not enough down trim
T-1853 Payload Arm Dataref replaced for X-Plane 12
T-1852 Weather datarefs updated for latest X-Plane 12 versions
T-1856 Wheels do not show up when on the ground.
T-1706 Fix settings files from appearing empty
T-1705 Add vacuum override dataref option
T-1702 CAPS Override command issue
T-1751 Add XP12 G1000 default sidebar disable flag
T-1720 Remove debug calls in subsystems
T-1739 Aircraft loading presents error about SR22_IVS_IN.obj
T-1746 +ve FF with Fuel Selector to OFF
T-1732 Should not be able to prime with fuel selector off
T-1730 Spark Plug Fouling not reproducible (Increased RPM drop on single mag when spark plugs are fouled)
T-1745 Fuel priming with cavitation sound and no fuel flow
T-1743 Priming cavitation sound should not happen after the aircraft is correctly primed
T-1706 Address config files staying empty
T-1715 Fix parachute for CAPS
T-1713 Fix use of deprecated dataref in physics
T-1716 Increase torque of C24ST5 Starter
T-1717 Migrate to support XP12 weight and balance system
Texture material fixes
Seat backs flipped normals.
New interior trim normal map and improved ambient occlusion.
Lighting adjustments.
…. and many other tweaks and changes to improve the behavior of the system with X-Plane 12
SR20/22 Entegra Release Notes
New Features:
Fully Optimized for X-Plane 12!
Updated Entegra avionics to handle the X-Plane navigation and airport formats with X-Plane 12
Entirely revamped 3D model, animations, and textures; designed and optimized for X-Plane 12 format changes and the new rendering engine.
Updated FMOD sound pack to take advantage of XP12 FMOD features, integrate new sound samples, and more.
ARM64 support prepped for the future. (Note: For ARM64 Mac (M1+ processors) users, ensure you are running Rosetta for now.
Bug Fixes & Improvements:
T-1849 Runways not showing on MFD
T-1795 Entegra ‘Nearest Airports’ page not populating
T-1818 PFD engine data order wrong
T-1775 SR2X Entegra PFD VSI adjustment should be ±50 fpm
T-1865 Additional Animation Datarefs
T-1863 Flap balloon too pronounced
T-1778 Flight control effectiveness XP12
T-1864 Elevator authority not enough down trim
T-1861 Add LPV Receiver for LPV Approach Capability
T-1763 Update to ARM Build
T-1862 Update Multi-threaded renderer
T-1807, T-1804 SR2x Entegra Crashes XP on launch
T-1853 Payload Arm Dataref replaced for X-Plane 12
T-1852 Weather datarefs updated for latest X-Plane 12 versions
T-1391 Rudder Pedal animation bug
T-1871 Engine sound tweaks
T-1868 Remove HUD objects (we plan on reintroducing the AOA hud in the future with the XP12 HUD system)
T-1872 Airplane too fast, general drag performance tuning
Nose gear height fix for compression
IVS fix
(SR20) Altitude compensating fuel pump fix
T-1718 SR20 misses oxygen refill button
T-1671/T-1760 Update to use common TSLIB system (massive infrastructure rewrite)
T-1669 Fix behavior of RSG Popups with MFD
T-1754 Straight and Level DFC90 Change to 1° pitch
T-1759 Fix transponder VFR command label
T-1706 Fix settings files from appearing empty
T-1705 Add vacuum override dataref option
T-1702 CAPS Override command issue
T-1746 +ve FF with Fuel Selector to OFF
T-1732 Should not be able to prime with fuel selector off
T-1730 Spark Plug Fouling not reproducible (Increased RPM drop on single mag when spark plugs are fouled)
T-1713 Fix use of deprecated dataref in physics
T-1716 Increase torque of C24ST5 Starter
T-1717 Migrate to support XP12 weight and balance system
Texture material fixes
Seat backs flipped normals
New interior trim normal map and improved ambient occlusion
Lighting adjustments
…. and many other tweaks to improve behavior for X-Plane 12
TorqueSim, RealSimGear, and X-Aviation are pleased to announce the release of the following updates for our products:
Take Command! SR22 G1000 Series 1.4.0
Take Command! SR20 G1000 1.4.0
Take Command! SR22 Entegra Series 1.2.0
Take Command! SR20 Entegra 1.2.0
These updates consist of a wide variety of improvements and further preparations for X-Plane 12. (This isn’t the X-Plane 12 update, but this is a step towards it. Once X-Plane 12 is released, we will release updates in due course to fully support the new sim at no additional charge to existing customers.
To Update: Download your installer(s) here and re-install!
Don’t have the aircraft already? You can check out the products here:
TorqueSim, RealSimGear, and X-Aviation are pleased to announce the release of the following updates for our products:
Take Command! SR22 G1000 Series 1.3.0
Take Command! SR20 G1000 1.3.0
Take Command! SR22 Entegra Series 1.1.0
Take Command! SR20 Entegra 1.1.0
These updates consist of a wide variety of improvements, and as we detailed last month, our initial preparations for X-Plane 12. (This isn’t the X-Plane 12 update, but this is a step towards it. Once X-Plane 12 is released, we will release updates in due course to fully support the new sim at no additional charge to existing customers.
To Update: Download your installer(s) here and re-install!
Don’t have the aircraft already? You can check out the products here:
Major infrastructure refactoring in preparation for X-Plane 12, bringing over our modern fundamental function library, activation system, and anonymized statistics platform from our in-development aircraft. These systems should increase the aircraft functions’ stability and provide a better basis going into X-Plane 12 for a more unified experience across our fleet.
Improved FMOD sounds throughout with surround sound support and fixed audio compression. Reworked sound space, sound positioning, and refined engine and prop sounds.
Visual model overhaul, improving fuselage mesh and interior textures. No more ripples or pinches in the composite exterior. Added 3D stitching on the glare shield.
Performance tuning and general improvements
Bug Fixes and Improvements:
[T-1203] Exterior lights should now work with “hide_3d_details” setting
[T-1602] Tabs fuel option on SR20 should fill properly
[T-1611] Persist setting option in the menu was previously finicky
[T-1431] SR22 NA adjust fuselage drag coefficients
[T-1542] Adjust MD302 power handling with RSG Cirrus Cockpit hardware
[T-1630] Wobbly propeller disc texture
[T-1631] Magnetic compass texture orientation
[T-1259] Improved engine model handling
[T-1639] Fixed hidden visor in exterior view
[T-1643] Fix GCU frequency ENT key on engine page for frequency entry
SR20/SR22 Entegra 1.1.0 Release Notes
New Features
Major infrastructure refactoring in preparation for X-Plane 12, bringing over our modern fundamental function library, activation system, and anonymized statistics platform from our in-development aircraft. These systems should increase the aircraft functions’ stability and provide a better basis going into X-Plane 12 for a more unified experience across our fleet.
Improved FMOD sounds throughout with surround sound support and fixed audio compression. Reworked sound space, sound positioning, and refined engine and prop sounds.
Visual model overhaul, improving fuselage mesh and interior textures. No more ripples or pinches in the composite exterior.
Add Annunciator Panel popup window
Improve performance of Entegra system
Improve engine handling
[T-1609] Support for simultaneous DFC90 button press functionality for RealSimGear DFC90 hardware
Commercial Edition: Customizable failures for aircraft and avionics
TorqueSim, RealSimGear, and X-Aviation are pleased to announce the release of the Take Command! SR22 G1000 Series and Take Command! SR20 G1000 1.2.2 updates. These updates consist of a variety of improvements which we have integrated to improve the aircraft.
To Update: Download your installer here and re-install!
TorqueSim, RealSimGear, and X-Aviation are pleased to announce the release of the Take Command! SR22 G1000 Series and Take Command! SR20 G1000 1.2.1 updates. These updates consist of a variety of improvements which we have integrated to improve the aircraft.
To Update: Download your installer here and re-install!
TorqueSim and RealSimGear are excited to announce the FAA Approval for our Basic Aviation Training Device (BATD). This means you can now have your very own FAA certified flight simulator at home. Having a BATD allows you to log flight time on your approved simulator in your logbook. If you have an Instrument Rating you can use an FAA Certified BATD to maintain instrument currency. In the presence of a CFI you can also use the simulator to contribute to certain requirements of a private pilot certificate and instrument rating.
The new FAA Approved BATD Simulator products from RealSimGear are unique in that they offer a true representation of the important flight controls found in common general aviation aircraft. Real buttons and knobs are provided, no distracting touch screens or cumbersome screen overlays. This is the most realistic, most affordable FAA approved simulator currently available of such quality. TorqueSim is thrilled to power this simulator via our TorqueSim SR2X Commercial Edition software, included with the BATD.
TorqueSim, RealSimGear, and X-Aviation are pleased to announce the release of the Take Command! SR22 G1000 Series and Take Command! SR20 G1000 1.2.0 updates. These updates consist of a wide variety of improvements which we have integrated to improve the aircraft. Many of these improvements have stemmed from our recently released Take Command! SR20/SR22 equipped with the Entegra Avionics.
To Update: Download your installer here and re-install!
