Take Command! SR20/22 v2.0.1 Updates Released

TorqueSim, RealSimGear, and X-Aviation are excited to announce the release of the following updates for our products, following further tweaks to enhance the aircraft for X-Plane 12.

Take Command! SR22 G1000 Series 2.0.1
Take Command! SR20 G1000 2.0.1
Take Command! SR22 Entegra Series 2.0.1
Take Command! SR20 Entegra 2.0.1

To Update: Download your installer(s) here and re-install!

Don’t have the aircraft already? You can check out the products here:

Looking for an FAA Approved BATD? Check out the RealSimGear Cirrus BATD for a solution powered by the TorqueSim SR20/22.

As always, thank you for supporting TorqueSim, RealSimGear, and X-Aviation! Enjoy these latest updates, and stay tuned for further improvements in the future.

SR20 G1000 and SR22 G1000 Release Notes

New Features:

Newly recorded sounds for the FMOD sound pack with new engine sounds and other accessory sounds improved! [SR22: Recorded from a local G3 SR22.]
Further X-Plane 12 tuning and improvements!
REMINDER!: ARM64 support prepped for future. (Note: For ARM64 Mac (M1+ processors) users, ensure you are running Rosetta for now.

Important Note
Currently, the Synthetic Vision System (SVS) is known to cause issues on some configurations when Zink is enabled. It is highly recommended to not use Zink with this version, with SVS enabled. Additionally, sporadic crashes during load have been seen on Mac.

SVS is enabled by default, but it can be disabled via a config file without the sim loaded. If you are experiencing crashes with the SR2X aircraft, disable SVS by navigating to X-Plane 12/Aircraft/X-Aviation/SR22 Series/{Aircraft Type}/plugins/sr_systems/settings/. Open the file settings.cfg in a text editor and make the change to the svs line:

To disable SVS: svs = 0
To enable SVS: svs = 1

Bug Fixes and Improvements:

Revamped all wing and gear textures to remove unnecessary ambient occlusion
Fixed gear height and operation
Adjusted chock position
Missing Cirrus logo fixed
T-1879 Disabling aircraft doesn’t reset G1000 engine bar override
Icing improvements
Fixed invalid dataref reference in physics plugin
Livery fixes
Wing open seam closed
Updated libacfutils version to improve rendering of non-svs components with Zink and Mac
Engine loops refined to rid the soundpack of all popping between loops
Prime Pump sound refined to blend more naturally between intro and loop
Engine start sound refined volume curve to allow for a smoother transition to engine sound from ignition
Adjust aircraft lighting
Livery fix for improper normal metal

SR20 Entegra and SR22 Entegra Release Notes

New Features:

Newly recorded sounds for the FMOD sound pack with new engine sounds and other accessory sounds improved! [SR22: Recorded from a local G3 SR22.]
Further X-Plane 12 tuning and improvements!
REMINDER!: ARM64 support prepped for future. (Note: For ARM64 Mac (M1+ processors) users, ensure you are running Rosetta for now.

Bug Fixes & Improvements:

Revamped all wing and gear textures to remove unnecessary ambient occlusion
Fixed gear height and operation
Adjusted chock position
Missing Cirrus logo fixed
STEC LIT bug fixed
Icing improvements
Fixed invalid dataref reference in physics plugin
Livery fixes
Wing open seam closed
Updated libacfutils version to improve rendering with Zink and Mac
Engine loops refined to rid the soundpack of all popping between loops
Prime Pump sound refined to blend more naturally between intro and loop
Engine start sound refined volume curve to allow for a smoother transition to engine sound from ignition
Adjust aircraft lighting
Icing fix
Fixed panel texture with text error
Livery fix for improper normal metal
Fix error in a livery configuration

Take Command! SR20/22 X-Plane 12 Support Update Released

TorqueSim, RealSimGear, and X-Aviation are excited to announce the release of the following updates for our products, following an intense development cycle to fully revamp the aircraft for X-Plane 12:

Take Command! SR22 G1000 Series 2.0.0
Take Command! SR20 G1000 2.0.0
Take Command! SR22 Entegra Series 2.0.0
Take Command! SR20 Entegra 2.0.0

To Update: Download your installer(s) here and re-install!

Don’t have the aircraft already? You can check out the products here:

Looking for an FAA Approved BATD? Check out the RealSimGear Cirrus BATD for a solution powered by the TorqueSim SR20/22.

As always, thank you for supporting TorqueSim, RealSimGear, and X-Aviation! Enjoy these latest updates, and stay tuned for further improvements in the future.

SR20/22 G1000 2.0.0 Release Notes

New Features:

Fully Optimized for X-Plane 12!
Entirely revamped 3D model, animations, and textures; designed and optimized for X-Plane 12 format changes and the new rendering engine.
Updated FMOD sound pack to take advantage of XP12 FMOD features, integrated new sound samples, and more
ARM64 support prepped for the future. (Note: For ARM64 Mac (M1+ processors) users, ensure you are running Rosetta for now.

SVS is enabled by default but can be disabled via a config file without the sim loaded. If you are experiencing crashes with the SR2X aircraft, disable SVS by navigating to X-Plane 12/Aircraft/X-Aviation/SR22 Series/{Aircraft Type}/plugins/sr_systems/settings/. Open the file settings.cfg in a text editor and make the change to the svs line:

To disable SVS: svs = 0
To enable SVS: svs = 1

Bug Fixes and Improvements:

T-1765 Engine page FOD information missing
T-1803 Fix color detection for profile view
T-1828 Charge battery command doesn’t function
T-1766 Add tick system to configs in TSLIB
T-1851 Increase base instrument brightness
T-1792 LPV Approach Capability due to missing SBAS receiver
T-1847 Zink crashes X-Plane during flight loading
T-1721 Get ARM build
T-1778 Flight control effectiveness XP12
T-1755 Excessive left yaw when taxiing
T-1827 GCU Input not working at random times
T-1848 Brake Hold with Max Effort functionality doesn’t work
T-1714 Switch G1000 rendering to G1000 render space
T-1858 Flaps balloon too pronounced on deployment
T-1857 Elevator trim authority not enough down trim
T-1853 Payload Arm Dataref replaced for X-Plane 12
T-1852 Weather datarefs updated for latest X-Plane 12 versions
T-1856 Wheels do not show up when on the ground.
T-1706 Fix settings files from appearing empty
T-1705 Add vacuum override dataref option
T-1702 CAPS Override command issue
T-1751 Add XP12 G1000 default sidebar disable flag
T-1720 Remove debug calls in subsystems
T-1739 Aircraft loading presents error about SR22_IVS_IN.obj
T-1746 +ve FF with Fuel Selector to OFF
T-1732 Should not be able to prime with fuel selector off
T-1730 Spark Plug Fouling not reproducible (Increased RPM drop on single mag when spark plugs are fouled)
T-1745 Fuel priming with cavitation sound and no fuel flow
T-1743 Priming cavitation sound should not happen after the aircraft is correctly primed
T-1706 Address config files staying empty
T-1715 Fix parachute for CAPS
T-1713 Fix use of deprecated dataref in physics
T-1716 Increase torque of C24ST5 Starter
T-1717 Migrate to support XP12 weight and balance system
Texture material fixes
Seat backs flipped normals.
New interior trim normal map and improved ambient occlusion.
Lighting adjustments.

…. and many other tweaks and changes to improve the behavior of the system with X-Plane 12

SR20/22 Entegra Release Notes

New Features:

Fully Optimized for X-Plane 12!
Updated Entegra avionics to handle the X-Plane navigation and airport formats with X-Plane 12
Entirely revamped 3D model, animations, and textures; designed and optimized for X-Plane 12 format changes and the new rendering engine.
Updated FMOD sound pack to take advantage of XP12 FMOD features, integrate new sound samples, and more.
ARM64 support prepped for the future. (Note: For ARM64 Mac (M1+ processors) users, ensure you are running Rosetta for now.

Bug Fixes & Improvements:

T-1849 Runways not showing on MFD
T-1795 Entegra ‘Nearest Airports’ page not populating
T-1818 PFD engine data order wrong
T-1775 SR2X Entegra PFD VSI adjustment should be ±50 fpm
T-1865 Additional Animation Datarefs
T-1863 Flap balloon too pronounced
T-1778 Flight control effectiveness XP12
T-1864 Elevator authority not enough down trim
T-1861 Add LPV Receiver for LPV Approach Capability
T-1763 Update to ARM Build
T-1862 Update Multi-threaded renderer
T-1807, T-1804 SR2x Entegra Crashes XP on launch
T-1853 Payload Arm Dataref replaced for X-Plane 12
T-1852 Weather datarefs updated for latest X-Plane 12 versions
T-1391 Rudder Pedal animation bug
T-1871 Engine sound tweaks
T-1868 Remove HUD objects (we plan on reintroducing the AOA hud in the future with the XP12 HUD system)
T-1872 Airplane too fast, general drag performance tuning
Nose gear height fix for compression
IVS fix
(SR20) Altitude compensating fuel pump fix
T-1718 SR20 misses oxygen refill button
T-1671/T-1760 Update to use common TSLIB system (massive infrastructure rewrite)
T-1669 Fix behavior of RSG Popups with MFD
T-1754 Straight and Level DFC90 Change to 1° pitch
T-1759 Fix transponder VFR command label
T-1706 Fix settings files from appearing empty
T-1705 Add vacuum override dataref option
T-1702 CAPS Override command issue
T-1746 +ve FF with Fuel Selector to OFF
T-1732 Should not be able to prime with fuel selector off
T-1730 Spark Plug Fouling not reproducible (Increased RPM drop on single mag when spark plugs are fouled)
T-1713 Fix use of deprecated dataref in physics
T-1716 Increase torque of C24ST5 Starter
T-1717 Migrate to support XP12 weight and balance system
Texture material fixes
Seat backs flipped normals
New interior trim normal map and improved ambient occlusion
Lighting adjustments

…. and many other tweaks to improve behavior for X-Plane 12

Take Command! SR20/22 Updates Released

TorqueSim, RealSimGear, and X-Aviation are pleased to announce the release of the following updates for our products:

Take Command! SR22 G1000 Series 1.4.0
Take Command! SR20 G1000 1.4.0
Take Command! SR22 Entegra Series 1.2.0
Take Command! SR20 Entegra 1.2.0

These updates consist of a wide variety of improvements and further preparations for X-Plane 12. (This isn’t the X-Plane 12 update, but this is a step towards it. Once X-Plane 12 is released, we will release updates in due course to fully support the new sim at no additional charge to existing customers.

To Update: Download your installer(s) here and re-install!

Don’t have the aircraft already? You can check out the products here:

SR20/22 G1000 1.4.0 Release Notes

New Features:

Improved maintenance system with expanded procedures and more detailed readouts to distinguish between states and mechanic actions.
Physics model improvements, including addressing the starting behaviors by addressing issues in the fuel priming logic.
[T-1675] 3D overhaul for windows and ice visualization system (IVS), which looks much better and should increase sim performance!
[T-1619] Proper Instrument Brightness Knob Behavior with G1000 Screen Dimming

Bug Fixes and Improvements:

Fixed TKS filter clogs causing too high of pressure rise in TKS system
Fixed bugs in fuel refilling
Fixed physics state files not showing on Mac
[T-1661] Cirrus magnetic compass missing current direction needle
[T-1672] Glareshield stitching 2 stitches out of place
[T-1677] FMOD improvements and fixes
[T-1674] New windows and seals
[T-1675] IVS System updates Window icing
[T-1670] Missing ice lights
[T-1676] Missing inspection panel screws – wing root
[T-1673] Mesh clean up (350k triangles removed)
[T-1655] Improve stutters by moving asynchronous tasks to separate thread from the main sim.
[T-1647] Failures and Maintenance Rework
[T-1658] Make UI inspection output scrollable/smaller
[T-1662] Add option to disable ELT
[T-1663] Custom flaps dataref for FMOD
[T-1659] Check batteries for commercial sims
[T-1680] Add hardware trigger command for CAPS deployment

SR20/22 Entegra 1.2.0 Release Notes

New Features:

Improved maintenance system with expanded procedures and more detailed readouts to distinguish between states and mechanic actions.
Physics model improvements, including addressing the starting behaviors by addressing issues in the fuel priming logic.
[T-1675] 3D overhaul for windows and ice visualization system (IVS), which looks much better and should increase sim performance!

Note: With this version, Linux support has been removed from the aircraft.

Bug Fixes and Improvements:

Fixed TKS filter clogs causing too high of pressure rise in TKS system
Fixed bugs in fuel refilling
Fixed physics state files not showing on Mac
[T-1391] Rudder Pedal animation bug
[T-1661] Cirrus magnetic compass missing current direction needle
[T-1677] FMOD improvements and fixes
[T-1674] New windows and seals
[T-1675] IVS System updates Window icing
[T-1670] Addressed ice lights
[T-1676] Missing inspection panel screws – wing root
[T-1673] Mesh clean up (350k triangles removed)
[T-1655] Improve stutters by moving asynchronous tasks to separate thread from the main sim.
[T-1647] Failures and Maintenance Rework
[T-1658] Make UI inspection output scrollable/smaller
[T-1662] Add option to disable ELT
[T-1663] Custom flaps dataref for FMOD

Take Command! SR20/22 Updates Released, Preparing for X-Plane 12

TorqueSim, RealSimGear, and X-Aviation are pleased to announce the release of the following updates for our products:

Take Command! SR22 G1000 Series 1.3.0
Take Command! SR20 G1000 1.3.0
Take Command! SR22 Entegra Series 1.1.0
Take Command! SR20 Entegra 1.1.0

These updates consist of a wide variety of improvements, and as we detailed last month, our initial preparations for X-Plane 12. (This isn’t the X-Plane 12 update, but this is a step towards it. Once X-Plane 12 is released, we will release updates in due course to fully support the new sim at no additional charge to existing customers.

To Update: Download your installer(s) here and re-install!

Don’t have the aircraft already? You can check out the products here:

SR20/22 G1000 1.3.0 Release Notes

New Features:

Major infrastructure refactoring in preparation for X-Plane 12, bringing over our modern fundamental function library, activation system, and anonymized statistics platform from our in-development aircraft. These systems should increase the aircraft functions’ stability and provide a better basis going into X-Plane 12 for a more unified experience across our fleet.
Improved FMOD sounds throughout with surround sound support and fixed audio compression. Reworked sound space, sound positioning, and refined engine and prop sounds.
Visual model overhaul, improving fuselage mesh and interior textures. No more ripples or pinches in the composite exterior. Added 3D stitching on the glare shield.
Performance tuning and general improvements

Bug Fixes and Improvements:

[T-1203] Exterior lights should now work with “hide_3d_details” setting
[T-1602] Tabs fuel option on SR20 should fill properly
[T-1611] Persist setting option in the menu was previously finicky
[T-1431] SR22 NA adjust fuselage drag coefficients
[T-1542] Adjust MD302 power handling with RSG Cirrus Cockpit hardware
[T-1630] Wobbly propeller disc texture
[T-1631] Magnetic compass texture orientation
[T-1259] Improved engine model handling
[T-1639] Fixed hidden visor in exterior view
[T-1643] Fix GCU frequency ENT key on engine page for frequency entry

SR20/SR22 Entegra 1.1.0 Release Notes

New Features

Major infrastructure refactoring in preparation for X-Plane 12, bringing over our modern fundamental function library, activation system, and anonymized statistics platform from our in-development aircraft. These systems should increase the aircraft functions’ stability and provide a better basis going into X-Plane 12 for a more unified experience across our fleet.
Improved FMOD sounds throughout with surround sound support and fixed audio compression. Reworked sound space, sound positioning, and refined engine and prop sounds.
Visual model overhaul, improving fuselage mesh and interior textures. No more ripples or pinches in the composite exterior.
Add Annunciator Panel popup window
Improve performance of Entegra system
Improve engine handling
[T-1609] Support for simultaneous DFC90 button press functionality for RealSimGear DFC90 hardware
Commercial Edition: Customizable failures for aircraft and avionics

Bug Fixes and Improvements

[T-1578] Add PFD Knob labels
[T-1571] Fix Entegra PFD knob push action
[T-1604] Fix engine parameter rounding errors
[T-1575] Improve automatic popup handling
[T-1637] Add in-sim popup control for windows
[T-1631] Fix magnetic compass orientation
[T-1638] Adjusted Linux dependencies
[T-1513] Commercial Edition: Improved oil pump failure, Added configurable Magneto failures
[T-1639] Fixed hidden visor in exterior view
[T-1630] Fix propeller disc wobbly texture
[T-1629] Fix bungled Linux OpenGPWS versions
[T-1641] Fix DFC90 popup window label brightness

Screenshot courtesy of RobH via the TorqueSim Discord

Take Command! SR20/SR22 G1000: Update 1.2.2 Released

TorqueSim, RealSimGear, and X-Aviation are pleased to announce the release of the Take Command! SR22 G1000 Series and Take Command! SR20 G1000 1.2.2 updates. These updates consist of a variety of improvements which we have integrated to improve the aircraft.

To Update: Download your installer here and re-install!

Don’t have the aircraft already? You can check out the G1000 SR22 and SR20 here!

Take Command! SR20/SR22 G1000 Series Changelog:

Improvements:

Improve engine propeller governor behaviors and performance
Fix CAPS pin clickspot
Popup window jumping cursor bug on Windows resolved
MD302 HPA unit support (RealSimGear Cirrus Cockpit customers)
Miscellaneous bug and quality of life improvements

As always, thanks for supporting TorqueSim. We appreciate your feedback and support!

Take Command! SR20/SR22 Entegra: Update 1.0.3 Released

TorqueSim, RealSimGear, and X-Aviation are pleased to announce the release of the Take Command! SR22 Entegra Series and Take Command! SR20 Entegra 1.0.3 update. These updates consists of a wide variety of bug fixes which we have integrated to improve the aircraft.

To Update: Download your installer here and re-install!

Don’t have the aircraft already? You can check out the Entegra SR22 and SR20 here!

Take Command! SR20 Entegra and SR22 Entegra Series Changelog:

New Features:

Much improved integration with RealityXP GTNs and GNSs:
Implemented parsing RealityXP output waypoint names (prevents the “+XX-YY” style names that have been showing previously when the AIRAC cycle conflicts and a waypoint doesn’t exist in the different database between RealityXP/X-Plane
Improved behavior of CDI key with RealityXP on GPS1. The CDI key now works properly and following the “1-2-1 method” along with using the CDI key to switch between VLOC1/GPS1 should now work properly.

Bug Fixes & Improvements:

Fixed mouse cursor behavior on popup windows with the Windows operating system.
Improve MFD airspace altitude limit display location determination algorithm
Improve persistence system
Adjusted propeller governor override to remove prop fluctuations that was affecting a subset of users
Entegra OAT units on Map page match setting on the Engine page
Fix behavior of wind indicator on the ground
Update RealSimGear CommandMapping files
Add MD302 standby gauge for RealSimGear Cockpit hardware
Add setting to disengage parking break with toe break press
Disable obstacle database on Linux builds to prevent library loading issues
Fix trim hat labels

As always, thanks for supporting TorqueSim. We appreciate your feedback and support!

Take Command! SR20/SR22 G1000: Update 1.2.1 Released

TorqueSim, RealSimGear, and X-Aviation are pleased to announce the release of the Take Command! SR22 G1000 Series and Take Command! SR20 G1000 1.2.1 updates. These updates consist of a variety of improvements which we have integrated to improve the aircraft.

To Update: Download your installer here and re-install!

Don’t have the aircraft already? You can check out the G1000 SR22 and SR20 here!

Take Command! SR20/SR22 G1000 Series Changelog:

Improvements:

Add fix for users with frozen G1000 screens on startup
Fixed Avitab
Adjusted VR clickspots for throttle and mixture levers
Added ability to disable the G1000 multithreaded texture uploader for those with unsupported graphics cards
Prevent crash at sim quit caused by improper file access with Windows
Add support for increased G1000 screen resolution configurations
MD302 Auto Initialization with RealSimGear SR20/SR22 Cockpit Hardware
Updated RealSimGear Command Mapping files to support latest RealSimGear cockpit hardware

As always, thanks for supporting TorqueSim. We appreciate your feedback and support!

RealSimGear/TorqueSim SR20/SR22 BATD: FAA Approved!

TorqueSim and RealSimGear are excited to announce the FAA Approval for our Basic Aviation Training Device (BATD). This means you can now have your very own FAA certified flight simulator at home. Having a BATD allows you to log flight time on your approved simulator in your logbook. If you have an Instrument Rating you can use an FAA Certified BATD to maintain instrument currency. In the presence of a CFI you can also use the simulator to contribute to certain requirements of a private pilot certificate and instrument rating.

The new FAA Approved BATD Simulator products from RealSimGear are unique in that they offer a true representation of the important flight controls found in common general aviation aircraft. Real buttons and knobs are provided, no distracting touch screens or cumbersome screen overlays. This is the most realistic, most affordable FAA approved simulator currently available of such quality. TorqueSim is thrilled to power this simulator via our TorqueSim SR2X Commercial Edition software, included with the BATD.

Learn More!

The BATD is available in the Standard variant or Professional variant.

Both Versions Include:

RealSimGear G1000 Suite with back lighting
RealSimGear Cirrus Desktop Console & Cirrus Switch Panel
RealSimGear GCU Stack (Choice of Perspective or Perspective Plus version)
Flight Sim Spec PC
49″ Ultra Wide Curved Monitor
X-Plane 11 Professional Edition
Professional Edition TorqueSim SR20, SR22, or SR22TN Aircraft model
Premium Support

The Standard variant includes:

Thrustmaster Side Stick
Logitech Throttle
Logitech Rudder Pedals

The Pro variant includes:

RealSimGear Cirrus Yoke with Force Feedback
RealSimGear Cirrus Throttle
Thrustmaster TPR Rudder Pedals

Learn More!

Take Command! SR20/SR22 G1000: Update 1.2.0 Released

TorqueSim, RealSimGear, and X-Aviation are pleased to announce the release of the Take Command! SR22 G1000 Series and Take Command! SR20 G1000 1.2.0 updates. These updates consist of a wide variety of improvements which we have integrated to improve the aircraft. Many of these improvements have stemmed from our recently released Take Command! SR20/SR22 equipped with the Entegra Avionics.

To Update: Download your installer here and re-install!

Don’t have the aircraft already? You can check out the G1000 SR22 and SR20 here!

Take Command! SR22 G1000 Series Changelog:

Improvements:

Implemented a custom GPS intercept arming logic
Added the ability to hide the passenger 3D models
New RealSimGear G1000 Popout System
Flight model set to experimental by default
Prop disk visualization improvements
Added cold-weather engine cover
Added ELT triggering with high-G impacts
Added ability for cockpits without parking brake handles to disengage parking brake
FMOD sound improvements
CAPS cover now hides in the front right pouch
Livery specific normal maps with metallic paint
Added Carbon liveries
Various 3D and texture improvements
Cleaned belly dirt texturing
Tail number location reworked

Take Command! SR20 G1000 Changelog:

Improvements:

Implemented a custom GPS intercept arming logic
Added the ability to hide the passenger 3D models
New RealSimGear G1000 Popout System
Flight model set to experimental by default
Prop disk visualization improvements
Added cold-weather engine cover
Added ELT triggering with high-G impacts
Added ability for cockpits without parking brake handles to disengage parking brake
FMOD sound improvements
CAPS cover now hides in the front right pouch
Livery specific normal maps with metallic paint
Various 3D and texture improvements
Cleaned belly dirt texturing
Tail number location reworked

As always, thanks for supporting TorqueSim. We appreciate your feedback and support!

Take Command! SR20/SR22 Entegra: Update 1.0.2 Released

TorqueSim, RealSimGear, and X-Aviation are pleased to announce the release of the Take Command! SR22 Entegra Series and Take Command! SR20 Entegra 1.0.2 update. These updates consists of a wide variety of bug fixes which we have integrated to improve the aircraft.

To Update: Download your installer here and re-install!

Don’t have the aircraft already? You can check out the Entegra SR22 and SR20 here!